11oz Coffee Mug Sublimation Heat Press Transfer Machine Digital for Cup Printer

  

11oz Coffee Mug Sublimation Heat Press Transfer Machine Digital for Cup Printer. Product Name: Pro mug press machine. Rated Voltage: 110V / 220V. Length of the cable: 1.5M.

Set the temperature, such as ceramic mug 180 degrees, 180 seconds. After the temperature reaches 180 degrees, put the mug with the sublimation paper in the machine, press down the handle, and use moderate force. The machine will count down automatically after the handle is pressed down, and the mug can be taken out after the countdown is completed. Adjusting rod: adjust the pressure of the heater according to the mug specifications. Guide rod: to ensure that the pressure at both ends of the mug heatre is balanced.

E1/E2: E1/E2 appearing on the display means that there is a short circuit/open circuit in the temperature probe wire(that is, the wire is broken and connected to cause a short circuit, and the open circuit means that the wire is broken or the plug wire falls off). Check the aviation connector to fht mug heater.

Before working, you need to prepare the correct materials: sublimation mugs, sublimation papre, etc. The pattern turns yellow/brown: reduce the temperature or reduce the time. The color of the pattern in light/white: it is necessary to increase the temperature or add time. Mug heater bubbles: need to be replaced with new ones.

Temperature not rise: Check whether the heater wiring and the controller are plugged in tightly. If by e-packet, 7-15 days to USA, and 2-4 weeks to other most countries. We will track the item all the time until it is reached to you. We believe that we can produce a positive outcome to any situation to earn your like.