15 x15 High Pressure Heat Machine for Shirts, Digital Industrial Sublimation

  

15 x15 High Pressure Heat Machine for Shirts, Digital Industrial Sublimation Printer Transfer Vinyl. Heat Platen Size: 15" X 15" Non-Stick Coated Heat Platen; Voltage: 110V; Power: 1400 W. Temperature Range: 0 - 455. The Lower Platen has not pull out feature and it has Additional Room Underneath the Heat Press: To be able to thread the t-shirt onto the lower platen.

Allowing for pressure and transfer to be applied only onto one side of the shirt. The Automatic Floatation Feature: Automatically adjusts the top platen to apply even pressure on uneven or thicker substrate items.

Secondary Bottom Board Handle and Lower Pad Cover: The handle on bottom board will provide the added support for easy to use your heat press, make sure you have full control of your machine. The cover can be keep the bottom pad clean and effective prevention of the lower pad sliding when load and unload T shirt.

Upgraded Time/Temperature Gauge: When the temperature reaches the set temperature, the machine will sound 5 beeps to remind you. Put the cover over the lower planten pad and fasten the rope, install the bottom board handle.

Set the pressure to a good starting point. Turn on the heat press, then set the target temperature and time. Your heat press is now ready for use. [Delclynee 15x15 heat press machine] [Delclynee 15x15 heat press machine] How to check the temperature on your heat press We are from Delclynee Heat Press, we would like to talk to you about checking the temperature on your heat press.

An infrared gun is good for generalized temperatures but can often read 30-50°F due to angles, distance, reflections, so infrared tend to provide wide varying results. Another factor is checking surface temperature when it is heating, the surface temperature of the platen is also being cooled by air around it, but at this time the display shows the temperature numbers is from the inside heating tube.

As we know the proper temperature can make heating transfer successful------not necessarily the exact temperature of the platen which is more difficult to check. Although this process will still have some inconsistent readings, if you only have an infrared gun, I suggest you do the following steps to provide the accurate reading. Set your press to a temperature to check, such as 350°F and allow the press to sit for a few minutes (5-10 minutes) to stabilize the temperature.

While heat presses will turn themselves on and off to maintain temperature, this is normal. Just like your home oven, the heating elements will continue to turn themselves on and off to maintain temperature.

Then press with medium pressure for about 60 seconds, and lift it up and get your reading quickly, Check at least 5 points or more across the platen and average temperatures. Again, we do not feel this will have consistent results, but if you only have an infrared gun to check the temperature, this is usually a better test than pointing the infrared directly at the platen. Please note that while a heat press is closed and in operation, it is normal for the temperature to decrease a few degrees, because the heat transfers into the garment, pad, and lower platen.

[Delclynee 15x15 heat press machine for t shirts]. Product Dimensions: 14.96"L x 12.8"W x 21.65H.

Item Weight: 41.7 pounds. Best Sellers Rank: #7,987 in Arts, Crafts & Sewing (See Top 100 in Arts, Crafts & Sewing) #29 in Heat Press Machines. Date First Available: August 22, 2021. Customer service is our top priority!

Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions. Thank you for shopping with us. If ordering electrical items outside of the U.

Please note that they will come equipped with a standard U. You will need a suitable adapter to use the item in your country. An adult signature will be required. Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. Only factory defects are accepted as a reason for a return.

In the case of factory defects, if available, we will replace the product for you. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it.

The item and package should be in original and perfect condition. We do our best to process as quickly as possible.

Orders are processed immediately and dispatched to fulfillment as soon as they are received. For this reason, we are typically unable to honor cancellation requests. If the order has gone too far through the fulfillment process, we will be unable to cancel.