Cap Heat Press Transfer Machine heat transfer machine Model: SB-11 Voltage: 220V/110V Power: 300W Printing area: 8 14cm Weight: 12kg Outer box size: 39 24.5 36cm Operation process Insert the power supply manually, turn on the power switch, and the power indicator light will turn on immediately. Adjust the thermostat to the required temperature. After the temperature reaches the set temperature The instructions are extinguished, and work can begin at this time.Adjust the time controller to the desired time. Place the transfer hat on the lower ironing board, and then put on the ironing paper (pay attention to the front and back sides of the ironing paper), Press the handle down firmly until the end point. When the indicated time controller for hot stamping expires, The buzzer sounds, lifting the handle up to its original position.